StraPack D-53PLT2 Vertical Portable Pallet Strapper

Ergonomy

The D-53PLT2 is designed to economically and quickly strap most kinds of pallets using standard or heavier polypropylene strapping.

Effective

The D-53PLT2 can cut the time it takes to strap pallets by up to 2/3 when compared to hand tools. Its simple operation entails pushing the track into the pallet void, pressing a button to feed the strap, and inserting the tip of the strap in the machine – and within 2 seconds your strap operation is completed.

Easy operation

The D-53PLT2’s unique design enables to strap pallets as low as 350mm or 14″. Arch track is retractable with a hand-crank. The height of the track is also adjustable to two positions depending on the type of the pallet or size of its void.
For edge protection insertion, the manual mode can be selected to control strap completion. Battery operated version is available.
This ergonomically designed machine feeds strap under the pallet, rather than the operator having to reach under the pallet to pull the strap through. The machine is easily operated using the bidirectional lever and start switch.

■ 4-Way Pallet Entry

The bayonet height can be adjusted (10mm,
22.5mm,35mm) by a simple lever. Allows
cross strapping through various sized pallet
openings.

■ Lower Sealing for Small Pallets

Sealing Point is only 340mm from the floor.
Lower pallets can be strapped easily.

■ Versatile Tension Capability

Manual Tension or Automatic Tension are
available by means of a simple selector switch.
< Manual Tension Mode >
The strap tension can be controlled manually
via the Operation Bar, allowing edge protection
to be secured to the pallet prior to strap
completion.
< Auto Tension Mode >
Strap tension is applied automatically at a
preselected level.